AGCO EDT 1.127.24141.1181 [2024.08]

agco

5.0

AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL
AGCO ELECTRONIC DIAGNOSTIC TOOL

AGCO EDT 1.127.24141.1181 [2024.08]

agco

Description

La herramienta de diagnóstico electrónico (EDT) puede ser utilizada por los técnicos para conectarse a máquinas específicas que tengan un bus de red de área de controlador (CAN) como parte de la arquitectura del sistema electrónico. Puede realizar diagnósticos completos, programar y acceder a la localización de averías.

La herramienta de diagnóstico electrónico (EDT) puede ser utilizada por los técnicos para conectarse a máquinas específicas que tengan un bus de

Caracteristicas

Normal

USD 120.00

1

Antonio V. está en línea

Técnico Especialista

Descargar Ficha Técnica

Caracteristicas destacadas

  •   
    Tamaño:  39.20 GB
  •   
    Tamaño total:  81.00 GB
  •   
    Región:  TODAS LAS REGIONES
  •   
    Sistema Operativo:  WINDOWS 10 (64 BITS) , WINDOWS 11 (64 BITS)
  •   
    Tiempo de licencia:  3 AÑOS
  •   
    Idioma de la base de datos:  INGLÉS
  •   
    Idioma de Interface:  INGLÉS , FRANCÉS , FINLANDÉS , ALEMÁN , ESPAÑOL , PORTUGUÉS , DANÉS , RUSO , POLACO , ITALIANO , TURCO , SUECO , CHINO , NORUEGO , HOLANDÉS
  •   
    Tipo de Software:  DIAGNÓSTICO , REPROGRAMACIÓN
  •   
    SO no soportados:  WINDOWS 10 (32 BITS) , WINDOWS 7 (64 BITS) , WINDOWS 7 (32 BITS)
  •   
    Software Incompatibles:  CLAAS CDS , JOHN DEERE SERVICE ADVISOR , DEUTZ SERDIA

Interfaces Probadas

  •   
    agco 2x4 canusb

Actualizaciones

  • ENHANCEMENTS:
  • MINOR IMPROVEMENTS TO DIAGNOSTIC FUNCTIONALITY.
  • VEHICLES AFFECTED:
  • CHALLENGER: MT540, MT560, MT570, MT580
  • MASSEY FERGUSON: 7350, 7370, 7390, 7415
  • VALTRA: BT150, BT170, BT190, BT210
  • VEHICLE VERSION:
  • 4.84
  • PLUG-INS:
  • UPDATED PVED_CL PLUGIN TO VERSION 5.21
  • VEHICLES AFFECTED:
  • CHALLENGER: 660B MADE IN BRAZIL, 670B MADE IN BRAZIL, 680B MADE IN BRAZIL
  • MASSEY FERGUSON: 9695 MADE IN BRAZIL, 9795 MADE IN BRAZIL, 9895 MADE IN BRAZIL
  • VALTRA: BC6800, BC7800, BC8800
  • VEHICLE VERSION:
  • 1.28
  • SOFTWARE:
  • ACM VERSION 05.03.02
  • PLUG-INS:
  • PVED CL PLUGIN VERSION 5.21
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: HYBRID COMBINES (4690; 5690; 6690)
  • MASSEY FERGUSON: HYBRID COMBINES HD (4690HD; 5690HD; 6690HD)
  • VALTRA: BC4800, BC5800
  • VEHICLE VERSION:
  • 3.17
  • GENERAL:
  • ENABLED TIER 0 SELECTION FOR LEGACY HYBRID COMBINES MACHINES
  • SOFTWARE:
  • ACM VERSION 05.03.02
  • PLUG-INS:
  • UPDATED PVED_CL PLUGIN TO VERSION 5.21
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: MF8125, MF8225, MF9130, MF9330, MF9335, MF9350DRY
  • VALTRA: BS2225H, BS2517H, BS3120H, BS3330H, BS3335H, BS3350H
  • VEHICLE VERSION:
  • 4.5
  • GENERAL:
  • BUGFIX: TOPCON X25 CONSOLE - SOFTWARE FLASH INFORMATION STEPS
  • SOFTWARE:
  • UPDATE ACM TO VERSION 05.03.02
  • PLUG-INS:
  • UPDATED PVED_CL PLUGIN TO VERSION 5.21
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: MF 6700S STAGE 5 SERIES
  • MASSEY FERGUSON: MF 7700S STAGE 5 SERIES
  • VEHICLE VERSION:
  • 3.1
  • GENERAL:
  • FIX POTENTIAL ISSUE ON VD0X FLASH
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: 2700-4700 SERIES
  • MASSEY FERGUSON: 6700R SERIES
  • MASSEY FERGUSON: GLOBAL SERIES 4700-5700-6700
  • VALTRA: A100
  • VALTRA: A100HITECH SERIES
  • VALTRA: A4, A4S
  • VALTRA: A4HITECH SERIES
  • VALTRA: AC52.5, AC54.5, AC56.5
  • VEHICLE VERSION:
  • 7.6
  • SOFTWARE:
  • ACM 05.03.02 FOR SA MACHINES
  • PLUG-INS:
  • UPDATED PVED_CL PLUGIN TO VERSION 5.21
  • VEHICLES AFFECTED:
  • FENDT: FENDT TRACTOR ACM SUPPORT, X1000 SERIES
  • VEHICLE VERSION:
  • 1.25
  • GENERAL:
  • NOW SUPPORTS THE WIFI PASSWORD FOR ENCRYPTED WIFI CONNECTIONS.
  • CONFIGURATION:
  • FIXED AN ISSUE INTRODUCED IN RELEASE 2024.3.OC1 THAT THE ACM REPLACEMENT PROCEDURE COULD NOT SELECT THE SOFTWARE FILE.
  • SOFTWARE:
  • UPDATE THE ACM SW TO VER 05.03.02.
  • PLUG-INS:
  • UPDATE TO ACM 6.19
  • VEHICLES AFFECTED:
  • FELLA: SM8312, SM9314
  • VEHICLE VERSION:
  • 4.6
  • GENERAL:
  • NEW IN SW 4.3.0
  • FACTORY SETTINGS: INCREASE RANGE OF TIME FRONT UP
  • FIX EEPROM LAYOUT FOR DTC/AUX
  • TC DDOP: ADD OFFSET X/Y TO ROOT DEVICE
  • UPDATE APPLECUCERT_REFERENCENR TO 441
  • TC CLIENT CAPABILITIES: SEND SC FUNCTIONALITY ONLY IF ENABLED IN FACTORY SETTINGS
  • SOFTWARE:
  • 4.3.0
  • VEHICLES AFFECTED:
  • CHALLENGER: MT600E WITH TMC DISPLAY
  • MASSEY FERGUSON: 8700 WITH DATATRONIC 5 SERIES
  • MASSEY FERGUSON: MF 8700S SERIES
  • VALTRA: S4 WITH SMARTTOUCH DISPLAY SERIES
  • VEHICLE VERSION:
  • 7.5
  • GENERAL:
  • FIX POTENTIAL ISSUE ON VD0X FLASH
  • PLUG-INS:
  • NEW NT03 CONTENT FOR VALTRA MODELS
  • ADD FEATURE UNLOCK FOR CTF
  • SOFTWARE:
  • NEW NT03 EMBEDDED SOFTWARE V2.7.6 FOR VALTRA MODELS:
  • COMPATIBILITY WITH NEW NT03 HARDWARE
  • ADD CTF FUNCTIONALITY
  • NEW NT03 STANDALONE SOFTWARE V1.7.6 FOR VALTRA MODELS:
  • COMPATIBILITY WITH NEW NT03 HARDWARE
  • ADD CTF FUNCTIONALITY
  • VEHICLES AFFECTED:
  • FENDT: IDEAL COMBINES
  • MASSEY FERGUSON: IDEAL COMBINES
  • VEHICLE VERSION:
  • 1.104
  • GENERAL:
  • INJECTOR LEAKAGE TEST ROUTINE UPDATE
  • SOFTWARE:
  • ENGINE MAN
  • D2676LE137C VER. B276F7C0.X69 B276F1.A69
  • D2676LE145A VER. B276F7D0.X69 B276F1.A69
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: 1700 SERIES
  • VEHICLE VERSION:
  • 2.39
  • DIAGNOSTICS:
  • ADDED THE 4WD INDICATOR TO THE HST TRANSMISSION DIAGNOSTIC SURFACE
  • TARGET ENGINE SPEED ON "EXHAUST/AIR/FUEL" PAGE UNDER "ENGINE DIAGNOSTIC" FUNCTION TO SHOW "LOW IDLE" WHEN IT STUCK AT 8192 RPM
  • CONFIGURATION:
  • GRAPH IN "EXHAUST SYSTEM REGENERATION" CONFIGURATION TO SHOW CORRECT VALUES ACCORDING TO CORRECT SCALES
  • VEHICLES AFFECTED:
  • FENDT: TIGO LOADER WAGON
  • VEHICLE VERSION:
  • 3
  • GENERAL:
  • NEW IN RELEASE 2024.4
  • BUG FIX SENSOR ERROR: WHEN LEAVING THE SET MENU, THE ERROR WAS ACTIVATED THAT THE SENSOR S44 IS DEFECTIVE, ALTHOUGH THERE IS NO ERROR.
  • COMPATIBILITY WITH NEW KEYPAD INTEGRATED.
  • SOFTWARE:
  • 1.41.3
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: 7342
  • MASSEY FERGUSON: 7342 MCS
  • MASSEY FERGUSON: 7343
  • MASSEY FERGUSON: 7343 MCS
  • MASSEY FERGUSON: 7344
  • MASSEY FERGUSON: 7344 MCS
  • FENDT: CORUS 518
  • FENDT: CORUS 518 MCS
  • FENDT: CORUS 522
  • FENDT: CORUS 522 MCS
  • FENDT: CORUS 526
  • FENDT: CORUS 526 MCS
  • VEHICLE VERSION:
  • 6.26
  • GENERAL:
  • ADDED ASIA REGION AVAILABILITY FOR MF BRANDED MACHINES
  • IMPLEMENTATION OF STRAW CHOPPER SELECTION IN SYSTEM SETUP
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: MF 3700 SERIES
  • MASSEY FERGUSON: MF 3X SERIES
  • VEHICLE VERSION:
  • 1.8
  • GENERAL:
  • MF3 75HP ARE NOW CONSIDERED STAGE5 TO GET ACCESS TO CORRECT DIAGNOSTIC FUNCTIONS
  • RENAME MODELS MF3.85, MF3.95, MF3.105, MF3.115 TO ADD THE INFORMATION 'NON-CAB ONLY'
  • REMOVE MF3.115 BECAUSE IT IS ONLY A CAB MODEL SO NOT MANAGED IN EDT
  • ADD MF3 MODELS IN NORTH AMERICA REGION
  • CONFIGURATION:
  • FIX A BUG WITH THE TRACTOR CONFIGURATION NOT SHOWING THE PARAMETER "REAR PTO TYPE"
  • IN VIN CONFIGURATION, ALLOW USER TO SELECT AND CHANGE THE MANUFACTURER CODE
  • PLUG-INS:
  • NEW FPT STAGE5 PLUGIN
  • ADD ENGINE DIAGNOSTIC TESTS
  • ADD FLASH OF SOFTWARE FUNCTIONALITY
  • SOFTWARE:
  • ADD SPECIFIC NORTH AMERICA SOFTWARE
  • ADD STAGE5 ENGINE SOFTWARE
  • VEHICLES AFFECTED:
  • CHALLENGER: MT 700E, MT 800E, MT 900E
  • VEHICLE VERSION:
  • 2.91
  • GENERAL:
  • NEW ENGINE SOFTWARE VERSION 1.22.2 REV. 1
  • SOFTWARE UPDATE TO WORK WITH THE OLD OR NEW MAF SENSOR
  • SOFTWARE:
  • ENGINE – MT755E T4F (SPEC # 98703) ACX352310A_1
  • ENGINE – MT775E T4F (SPEC # 98705) ACX352306A_1
  • ENGINE – MT765E T4F (SPEC # 98706) ACX352308A_1
  • ENGINE – MT765E LRC (SPEC # 98707) ACX352313A_1
  • ENGINE – MT775E LRC (SPEC # 98708) ACX352312A_1
  • ENGINE – MT755E LRC (SPEC # 98719) ACX352314A_1
  • ENGINE – MT775E MEAS T4F (SPEC # 98726) ACX352307A_1
  • ENGINE – MT765E MEAS T4F (SPEC # 98727) ACX352309A_1
  • ENGINE – MT755E MEAS T4F (SPEC # 98728) ACX352311A_1
  • ENGINE – MT1149/MT845E MEAS T4F (SPEC # 168714) 837093613_4
  • ENGINE – MT1149/MT845E/MT945E LRC (SPEC # 168710) 837093483_3
  • ENGINE – MT1149/MT845E T4F (SPEC # 168701) 837093320_5
  • ENGINE – MT1154/MT855E MEAS T4F (SPEC # 168713) 837093612_4
  • ENGINE – MT1154/MT855E/MT955E LRC (SPEC # 168707) 837093326_3
  • ENGINE – MT1154/MT855E T4F (SPEC # 168702) 837093319_5
  • ENGINE – MT1159/MT865E MEAS T4F (SPEC # 168712) 837093611_4
  • ENGINE – MT1159/MT865E/MT965E LRC (SPEC # 168708) 837093325_3
  • ENGINE – MT1159/MT865E T4F (SPEC # 168703) 837093318_5
  • ENGINE – MT1165/MT875E MEAS T4F (SPEC # 168711) 837093610_4
  • ENGINE – MT1165/MT875E/MT975E LRC (SPEC # 168709) 837093324_3
  • ENGINE – MT1165/MT875E T4F (SPEC # 168700) 837093317_5
  • ENGINE – MT955E MEAS T4F (SPEC # 168717) 837093616_5
  • ENGINE – MT955E T4F (SPEC # 168704) 837093323_5
  • ENGINE – MT965E MEAS T4F (SPEC # 168716) 837093615_4
  • ENGINE – MT965E T4F (SPEC # 168705) 837093322_5
  • ENGINE – MT975E MEAS T4F (SPEC # 168715) 837093614_4
  • ENGINE – MT975E T4F (SPEC # 168706) 837093321_5
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: 530R
  • MASSEY FERGUSON: 535R
  • VALTRA: R530
  • VALTRA: R535
  • VEHICLE VERSION:
  • 1.16
  • GENERAL:
  • BUGFIX: EEM4 SW LATEST VERSION INFORMATION ON NETWORK SCAN
  • BUGFIX: ENGINE RPM IS INCORRECT IN DIAGNOSTIC PAGE
  • BUGFIX: INCORRECT LABEL FOR INSTRUMENT CLUSTER SW FLASH
  • REVERT EXT SOFTWARE INCLUSION 01.02.04 INSTEAD OF 01.03.00 TO AVOID HOIST BUTTON BUG FOUND ON 01.03.00
  • REVERT PACK OF EEPROM (BASE EEPROM REVERTED ALSO TO BE COMPATIBLE WITH V01.02.04)
  • ADDED MORE PARAMETERS TO THE MFA RETAINED EEPROM VALUES TO PRESERVE MORE ITEMS SUCH AS THE JOYSTICK CALIBRATIONS.
  • CONFIGURATION:
  • VIN SETUP: ADDED SUPPORT TO DRYBOX MACHINES
  • SOFTWARE:
  • ACM VERSION 05.03.02
  • DOWNGRADE EXT LIQUID SYSTEM CONTROLLER – FIRMWARE 01.02.04
  • VIPER4 – FIRMWARE V23.4.0.30
  • RCM – FIRMWARE V23.4.1.40
  • ABM XRT AUTOBOOM – FIRMWARE V23.2.4.8
  • EMM4 – FIRMWARE ACX3681970_2 (VERSION 6.3.0 REV. 2 - APPLICABLE FOR 525R)
  • VEHICLES AFFECTED:
  • FENDT: 932, 934, 934H, 937, 937H, 937H HT
  • VEHICLE VERSION:
  • 1.22
  • GENERAL:
  • REVERTED TO ACM PLUGIN 6.16 – NO LONGER INCLUDES THE FOLLOWING CHANGE FROM RELEASE 2024.3: IMPROVED IDENTIFICATION OF ACM HARDWARE AND SOFTWARE ON NETWORK SCAN. CURRENT ACM SOFTWARE IS STILL V05.03.02
  • DIAGNOSTICS:
  • ADDED THE CAN RESISTANCE AND TERMINATORS AND THE CONNECTOR LOCATIONS DIAGNOSTIC PAGES.
  • ADDED “CONNECTOR LOCATIONS” DIAGNOSTIC PAGE
  • SOFTWARE:
  • CHASSIS CONTROLLER EXT (V03.04.04):
  • BUG-11226 – ENGINE RANDOMLY COMMANDED TO MAX SPEED WITH TMS ACTIVE
  • HIGHCLEAR-3339 – LOGIC CHANGE FOR DRIVE LEVER ERROR 04.0.57
  • BUG-10299 - WHEEL SPEED & RADAR CALIBRATIONS NOT SAVING THROUGH KEY CYCLE
  • BUG-2694 – WEATHER STATION COMPASS POLE PORTUGUESE TRANSLATION ISSUE
  • BUG-12634 - REVERSIBLE ENGINE FAN CONTROL USING WRONG AIR CONDITIONING STATE
  • BASE EEPROM CHANGE – RAVEN PROPA GUIDANCE PARAMETER “USE_RAVEN_PROPA_GUIDANCE” IS TURNED OFF
  • ENGINE-S5_235KW (ACX289116B_1):
  • LAST UPDATE WAS MISSING ONE DEF PUMP RELATED NEW SAFETY FUNCTION (RELATED TO HIGH ELEVATIONS) DUE TO PROCESS MISTAKE.
  • ENGINE-S5_253KW (ACX289122B_1):
  • LAST UPDATE WAS MISSING ONE DEF PUMP RELATED NEW SAFETY FUNCTION (RELATED TO HIGH ELEVATIONS) DUE TO PROCESS MISTAKE.
  • ENGINE-S5_272KW (ACX289127B_1):
  • LAST UPDATE WAS MISSING ONE DEF PUMP RELATED NEW SAFETY FUNCTION (RELATED TO HIGH ELEVATIONS) DUE TO PROCESS MISTAKE.
  • RAVEN VIPER4+ (V23.4.1.11):
  • ISSUES
  • LOCK UP DUE TO SERVICE TOOL ISSUE RELATED TO WIFI DROPS
  • RAVEN LEGACY CAN ECU’S NOT WORKING (ACCUBOOM, AUTOBOOM, ETC)
  • SLOW DOWN DUE TO ACCESSING SCOUT WIDGET LISTS
  • SINGLE PRODUCT WIDGET ASSIGNMENT STAYING ASSIGNED ON POWER CYCLE
  • AGSYNC FIXES
  • LARGE TIME JUMPS DUE TO STARTUP AND GPS/RS1 STARTUP
  • RAVEN VSN (V23.4.1.12):
  • ISSUES
  • CAMERA ROW GUIDANCE FAILURES UPON POWER CYCLE DUE TO DYNAMIC HEIGHT SOFTWARE ISSUE
  • ROW GUIDANCE RADAR PROGRAMMING UPDATE CAUSING UT LOCKUP
  • PLUG-INS:
  • ROLLBACK ACM PLUGIN VERSION 6.16
  • VEHICLES AFFECTED:
  • CHALLENGER: RG 900, RG 1100, RG 1300
  • ROGATOR: RG 900, RG 1100, RG 1300
  • VEHICLE VERSION:
  • 1.79
  • SOFTWARE:
  • UPDATE 6 ENGINE FILES.
  • ADDED SOURCE ADDRESS FOR MAF SENSOR AUTOMATED VERSION DETECTION
  • MAXIMUM ENGINE HOURS LIMITED TO 1 000 000 HOURS
  • VEHICLES AFFECTED:
  • FENDT:ROGATOR 600 MY23
  • VEHICLE VERSION:
  • 1.5
  • GENERAL:
  • NEW SOFTWARE CHASSIS: AGCO_RG600P-C_01.02.00
  • NEW SOFTWARE SPRAYER: AGCO_RG600P-I_01.05.00
  • SOFTWARE:
  • CHASSIS: AGCO_RG600P-C_01.02.00
  • SPRAYER: AGCO_RG600P-I_01.05.00
  • PLUG-INS:
  • TRIMBLE 482 SET TO: AG482_11_26_001_4
  • VEHICLES AFFECTED:
  • FENDT: ROGATOR 600 MY2024
  • VEHICLE VERSION:
  • 1.3
  • GENERAL:
  • NEW SOFTWARE CHASSIS: AGCO_RG600P-C_01.02.00
  • NEW SOFTWARE SPRAYER: AGCO_RG600P-I_01.05.00
  • SOFTWARE:
  • CHASSIS: AGCO_RG600P-C_01.02.00
  • SPRAYER: AGCO_RG600P-I_01.05.00
  • PLUG-INS:
  • TRIMBLE 482 SET TO: AG482_11_26_001_4
  • VEHICLES AFFECTED:
  • FENDT: 5255 L, 5255 L PL, 6275 L, 6275 L PL, 5275 C, 5275 C SL 5275 C PL, 5275 C PLI, 6335 C, 6335 C PL, 6335 C PLI
  • LAVERDA: M 300, M 300 LC, M310, M310 LC, M 400, M 400 LC, M 400 LCI, M410, M410 LC, M410 LCI
  • MASSEY FERGUSON: 7345 S, 7345 S PL, 7347 S, 7347 S PL, 7360, 7360PL, 7360 PLI, 7370, 7370 PL, 7370 PLI, 7360 AL 4
  • VEHICLE VERSION:
  • 0.87
  • GENERAL:
  • ENGINE STAGEV: ENABLED MAF SENSOR OFFSET ZEROING FUNCTIONALITY FOR IMPROVED DIAGNOSTIC ROBUSTNESS.
  • NEW CONFIGURATION FILE FOR ACM. AVAILABLE HYDRAULIC OIL TEMPERATURE AND MACHINE DTCS.
  • SOFTWARE:
  • TELEMETRY CONFIGURATION FILE ACM VER. BRE_M_V1_9
  • ENGINE SOFTWARE SPEC. 84805 VER. ACX293935C_2
  • PLUG-INS:
  • EEM4F_DIAG VER. 6.23
  • MFA VER. 8.10
  • VEHICLES AFFECTED:
  • ATS: SP008-WIPER-RETROFIT
  • VEHICLE VERSION:
  • 1.11
  • GENERAL:
  • UPDATE FOR ERROR HANDLING DURING CALIBRATION
  • DIAGNOSTICS:
  • NO CHANGES MADE
  • CALIBRATIONS:
  • POWER SUPPLY INTERRUPTION DURING PARK-POSITION-SEARCHING ABORTS CALIBRATION
  • MOVE WIPER TO PARK POSITION WHEN ANGLE CONFIGURATION IS ABORTED WHILST "TESTRUN" IS ACTIVE
  • VEHICLES AFFECTED:
  • CHALLENGER: TG 8300
  • TERRAGATOR: 7300, 8300, 8400
  • VEHICLE VERSION:
  • 1.93
  • GENERAL:
  • ADDED SUPPORT FOR THE PVED_CL S7 REPLACEMENT VALVE.
  • REVERTED TO ACM PLUGIN 6.00 – NO LONGER INCLUDES THE FOLLOWING CHANGE FROM RELEASE 2024.3: IMPROVED IDENTIFICATION OF ACM HARDWARE AND SOFTWARE ON NETWORK SCAN.
  • SOFTWARE:
  • UPDATE THE TIER 4, 2ND GEN, DQS ENGINE FILES
  • ADDED SOURCE ADDRESS FOR MAF SENSOR AUTOMATED VERSION DETECTION
  • MAXIMUM ENGINE HOURS LIMITED TO 1 000 000 HOURS
  • PLUG-INS:
  • UPDATED PVED_CL PLUGIN TO 05.21
  • ROLL BACK ACM PLUGIN TO 06.00
  • VEHICLES AFFECTED:
  • VALTRA: BH G4, BH214 HITECH, BH224 HITECH
  • VEHICLE VERSION:
  • 3.1
  • SOFTWARE:
  • ACM SOFTWARE VERSION 5.03.02
  • PLUG-INS:
  • PVED CL VERSION 5.21
  • VEHICLES AFFECTED:
  • VALTRA: T4-SERIES 1A7 / 1B8, N4-SERIES 1B7 / 1C8
  • VEHICLE VERSION:
  • 1.107
  • GENERAL:
  • FIXED:
  • WARNING MESSAGE APPEARING WHILE SOFTWARE FLASHING FOR EEM4S5
  • "CRUISE DRIVING SPEED SETPOINT" VALUE IN "WORKING DIAGRAM SPEED" SCREEN UNDER "CRUISE" FUNCTION
  • SOFTWARE:
  • ADDED:
  • NEW SOFTWARE PACKAGE 1.14.0
  • S318V AND M118V STAGE5 ENGINE SOFTWARE V6.3.0
  • CABECU SOFTWARE V1.0.0.26006 (AC34.5, AC34.6, AC35.5, AC35.6)
  • CABECU_BRIDGE_TECU_CEAG_STANDALONE SOFTWARE V1.0.0.26006
  • NT03 SMARTTOUCH SOFTWARE V2.7.6
  • NT03 STANDALONE SOFTWARE V1.7.6
  • TC1
  • 5PS VERSU SOFTWARE V9.1.38.03 (AC35.5, AC35.6)
  • 5PS ACTIVE AND HITECH SOFTWARE V9.1.38.03 (AC36.5, AC36.6, AC37.5, AC37.6)
  • DIRECT (CVT) SOFTWARE V8.1.38.03 (AC34.5, AC34.6)
  • PLUG-INS:
  • UPDATED:
  • EEM4S5 TO V1.11
  • EEM4F_DIAGNOSTICS TO V6.23
  • FIXED: DEF DOSING QUANTITY VALUE IN SCR PROCESS PAGES UNDER ENGINE DIAGNOSTIC FUNCTION
  • CEA GUIDE TO V8.33
  • USE VD0X V3.217
  • PVED_CL TO V5.21
  • SUPPORT FOR THE S7 PVED_CL VALVE
  • VEHICLES AFFECTED:
  • MASSEY FERGUSON: 197, 235, 265
  • VEHICLE VERSION:
  • 1.33
  • GENERAL:
  • GENERAL BUGFIX RELEASE.
  • SOFTWARE:
  • NT03 - V4.03.07
  • FIXED OVERVIEW MANAGER BEHAVIOR THAT CLEARED THE SMALL PANE WHEN THE LARGE PANE WAS SET TO THE MAP.
  • FIXED EMPTY PAGES APPEARING IN THE CAROUSEL AFTER RESETTING TO THE DEFAULT CONFIGURATION.
  • OBSTACLES CAN NOW BE EDITED AND DELETED WITHOUT REMOVING THE FIELD THEY ARE ASSOCIATED WITH.
  • ENGINE ERROR MESSAGES FOR CN4 ARE NOW DISPLAYING SOOT/ASH LEVEL ERRORS PROPERLY.
  • PRECONDITIONS POPUPS NOW DISPLAY ONLY ONE TIME, EVEN IF THE FUNCTION IS ACTIVATED WHILE THE POPUP IS ALREADY DISPLAYED.
  • ACM - V05.04.04
  • VEHICLES AFFECTED:
  • CHALLENGER: MT400E SERIES
  • CHALLENGER: MT500E SERIES
  • ISEKI: I5700 SERIES
  • ISEKI: I6700 SERIES
  • ISEKI: I7700 SERIES
  • MASSEY FERGUSON: 5700S SERIES
  • MASSEY FERGUSON: 5700SL SERIES
  • MASSEY FERGUSON: 6700S SERIES
  • MASSEY FERGUSON: 7700 MADE IN BRAZIL SERIES
  • MASSEY FERGUSON: 7700 SERIES
  • MASSEY FERGUSON: 7700S SERIES
  • VALTRA: T195-250 SERIES
  • VEHICLE VERSION:
  • 8.23
  • SOFTWARE:
  • ACM VERSION 05.03.02
  • PLUG-INS:
  • UPDATED PVED_CL PLUGIN TO VERSION 5.21

Vehículos compatibles

No existe información disponible

Aviso

No existe información disponible

Productos Relacionados

TurboGarage

agregó este software

HINO DX2 1.1.22.3 [2022.03]

Hace 19 horas

¡Suscríbete!

Entérate de todas nuestras promociones y últimas novedades